T2 ELECTRONIC
SOLE-MILLING MACHINE
DETAILS
Due to the motorized C-arm, setting the working height is easy and fast.
The sequence related to every sole can be archived and recalled in the future when it’s needed.
The news introduced in the T2E are the replaceable spindle shafts, in order to use a very large range of mills with diameter up to 22mm.
DESCRIPTION
The T2 Electronics differs from the previous model by means of the adjustable working height, by the touch screen control panel and by the possibility in making up to 4 profiles on the single sole.
Therefore, the machine is equipped with two spindle shafts, it’s possible to install up to two mills on each.
The profile sequence is set up using a computer embedded into the control panel.
| TECHNICAL SPECS T2 | |
|---|---|
| SPINDLE POWER | 5.5 Kw |
| MILL SHAFT DIAMETER | 19 mm |
| MAX MATERIAL THICKNESS | 70 mm |
| NET WEIGHT | 600 Kg |
| DIMENSIONS | 750x950x1500h mm |
| TECHNICAL SPECS T2E | |
| TOOL DIAMETER MIN | 22 mm |
| MILL SHAFT DIAMETER | 19 mm |
| SECONDARY MILL SHAFT DIAMETER | 8 mm |
The illustrations are demostrative and may change depending on the manufacturer’s requirements.